Walker Jack study.

Anything not covered in the specific categories above.

Walker Jack study.

Postby pfarber » Fri May 11, 2012 9:47 pm

Seems like one of the accepted CCKW jacks is the Walker 925. But there are several that have that number. Below are two Walker 925s. Note the tags.

Whats odd is that TM9-801 April 1944 is the only TM9-801 to have a picture of the jack. The April 43 version does not.

Also, it seems that BOTH series C and D may have been used. If you look at the APRIL 1944 TM9 on page 23 the linkage is the flat stamped type (Series D), and on page 402 it shows another jack with the cast linkage (Series C). Both jacks in the TM seem to have different decals.

Series C (3 1/2 tons)

Walker-925-C_tag.JPG


Walker-925-C_body.JPG


Series D (3 tons)

Walker-925-D_tag.jpg


Walker-925-D_body.jpg
I got a Mountain Cur and a ~~pitbull~~ big loveable cuddle puppy
RIP Kimber 5/26/2022
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2839
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Walker Jack study.

Postby Quasimodo » Tue May 15, 2012 9:10 pm

Some NOS WW2 vehicle jacks in attached pics - Hein Werner and Walker GMC jacks to the right - look for the letters GM in a box stamped into side of jack when hunting in the fleamarkets.
Attachments
Jack1.jpg
Jack2.jpg
Jack3.jpg
Quasimodo
 

Re: Walker Jack study.

Postby pfarber » Tue May 15, 2012 10:29 pm

Would it be possible to get some light on those jacks? Hard to make out details.

Also, if good photos (and sizes) of the decals can be sent to me they can be made... I do that now :)

Also of interest are the handles.
I got a Mountain Cur and a ~~pitbull~~ big loveable cuddle puppy
RIP Kimber 5/26/2022
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2839
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Walker Jack study.

Postby pfarber » Tue May 22, 2012 11:19 pm

I just wanted to post more pictures of the Walker 935 Series 'C' 3.5 ton jack.

Note that there was a decal.

P5220060.jpg


And it was painted blue at some point:

P5220061.jpg


And there appears to be either a part number stamped on the side. The second letter is an 'H'. The cross bar is not clear in the photo.

P5220062.jpg
I got a Mountain Cur and a ~~pitbull~~ big loveable cuddle puppy
RIP Kimber 5/26/2022
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2839
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Walker Jack study.

Postby pfarber » Wed Jun 06, 2012 1:55 pm

I recently purchased not only the Walker 925 C 3.5 ton jack, yet another Walker Jack a 927 Series A 3 ton jack.

Other than the load rating both are very similar. Both need some hydraulic fluid but other than that they seem to be functional.

Now to work on those handles and the decals.

Just like anything else CCKW... no jacks for years.. then BAM! Two in a month.
I got a Mountain Cur and a ~~pitbull~~ big loveable cuddle puppy
RIP Kimber 5/26/2022
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2839
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet


Return to General