Manifolds/Carb/Governor/Horn
Posted: Thu Oct 24, 2013 11:12 pmI believe I have a numbers correct 'stack' of carb, governor, intake and exhaust, and vacuum fitting for a G506.
Pics:
The governor checks out per the SNL, the intake did not have a number, but the location of the features looks OK, and the exhaust does have a number: 839130 (the first number could be an 8 or 9, the third number could be an 8 or 9.
All are in 'take off' condition and should be serviced/rebuilt.
I'm thinking $400 for the entire stack (incl the horn), plus shipping. No, I will not break it up, it all goes as one. I will consider reasonable offers that include a trade (basically issues of Army Motors from 1942/1943)
Pics:
- rsDSCN0006.png (873.56 KiB) Viewed 4556 times
- rsDSCN0007.png (944.96 KiB) Viewed 4556 times
- rsDSCN0008.png (921.16 KiB) Viewed 4556 times
- rsDSCN0012.png (959.71 KiB) Viewed 4556 times
The governor checks out per the SNL, the intake did not have a number, but the location of the features looks OK, and the exhaust does have a number: 839130 (the first number could be an 8 or 9, the third number could be an 8 or 9.
All are in 'take off' condition and should be serviced/rebuilt.
I'm thinking $400 for the entire stack (incl the horn), plus shipping. No, I will not break it up, it all goes as one. I will consider reasonable offers that include a trade (basically issues of Army Motors from 1942/1943)