SOLD Bantam T3 for sale $1800 or Reasonable offer
Posted: Wed Apr 05, 2017 7:06 pmI'm selling my Bantam T3 (best ID I can make... shocks are bolted on). Its been stored inside for 6+ years and its time to go... need space for G506/G508 parts.
The Good: Original (and why its so much) pintal and casting/landing leg. Frame straight and hand brake and all parts included. Includes a wiring harness (from Beachwood Canvas) and rear light mounts (no lights).
The Bad: The rear panel is bent, and the floor, while sold, is wavy and they they poked drain holes in the corners... but the original drain plug is still there. Wiring is NATO as are the lights/wheels/rims. One safety chain has been welded but it looks like a solid repair. All of these items are available as repro's.
I can deliver on the East cost for $1.50 a mile (well, depends, anything within a 500 miles of PA). I can go farther but anything more than 500 miles from my home is $2/mile. MO or Paypal (add 3% for Paypal fees).
It will be listed till sold. Pics are below.
This trailer is an EASY restoration (panels are completely usable and floor can be welded up to be watertight) just swap out the tires, add the harness/lights and paint.
The Good: Original (and why its so much) pintal and casting/landing leg. Frame straight and hand brake and all parts included. Includes a wiring harness (from Beachwood Canvas) and rear light mounts (no lights).
The Bad: The rear panel is bent, and the floor, while sold, is wavy and they they poked drain holes in the corners... but the original drain plug is still there. Wiring is NATO as are the lights/wheels/rims. One safety chain has been welded but it looks like a solid repair. All of these items are available as repro's.
I can deliver on the East cost for $1.50 a mile (well, depends, anything within a 500 miles of PA). I can go farther but anything more than 500 miles from my home is $2/mile. MO or Paypal (add 3% for Paypal fees).
It will be listed till sold. Pics are below.
This trailer is an EASY restoration (panels are completely usable and floor can be welded up to be watertight) just swap out the tires, add the harness/lights and paint.
- DSCN1303.jpg (221.67 KiB) Viewed 33881 times
- DSCN1304.jpg (214.51 KiB) Viewed 33881 times
- DSCN1305.jpg (211.67 KiB) Viewed 33881 times
- DSCN1306.jpg (197.62 KiB) Viewed 33881 times
- DSCN1307.jpg (228.82 KiB) Viewed 33881 times
- DSCN1310.jpg (195.64 KiB) Viewed 33881 times
- DSCN1311.jpg (168.17 KiB) Viewed 33881 times
- DSCN1312.jpg (209.42 KiB) Viewed 33880 times