tm9-801.com

Posted: **Thu Sep 26, 2013 10:35 pm**

Took the inner door skins off to sandblast. The military door is a simplification of the civvy door. The biggest difference is the window waistline wiper. In civvy doors its rubber and screwed in. On the G506 its a felt strip that fits into a folded groove.

: rP9260224.JPG (130.41 KiB) Viewed 9787 times

: rP9260225.JPG (138.15 KiB) Viewed 9787 times

Posted: **Sun Sep 29, 2013 9:23 am**

This is a rubber kit that would apply to civvy and *probably* early model G506s (no vehicle was safe from the great rubber purge of mid 42).

: rubber_window.PNG (174.67 KiB) Viewed 9781 times

The wiper seals would go on the inner/out door and acted as both a water barrier and a wind break. This was all redone in felt for the G506.

tm9-801.com

Inner door skin

Inner door skin

Re: Inner door skin