How to disassemble a CCKW composite bed

Topics relating to the chassis, cab, body, or cargo/dump bed.
Post Reply
deadline
Site Admin
Posts: 52
Joined: Wed Oct 10, 2007 1:16 am

How to disassemble a CCKW composite bed

Post by deadline »

Like many CCKW owners I have a cargo bed in need of restoration.

I recently learned that the bed can be broken down into easy to manage parts.

Heres how I did it:
Attachments
Heres where I started. There is also a bolt up under the channel. Don't forget it. I used my MAPP torch to loosen the rusted bolts. A 9/16ths deep socket and wrench were used.
Heres where I started. There is also a bolt up under the channel. Don't forget it. I used my MAPP torch to loosen the rusted bolts. A 9/16ths deep socket and wrench were used.
frontqtr.jpg (42.07 KiB) Viewed 23226 times
Cargo bed, composite, late war. Needs a good cleaning, new wood and some minor stake pocket work.. also replace all fasteners.
Cargo bed, composite, late war. Needs a good cleaning, new wood and some minor stake pocket work.. also replace all fasteners.
bed.jpg (33.82 KiB) Viewed 23226 times
My Motor Pool Sargent.
My Motor Pool Sargent.
tj.jpg (40.73 KiB) Viewed 23226 times
Top
Post Reply

Return to “Chassis/Body/Cargo Bed”